Hitachi SimpleTough 500 Gb Drive

As I started preparing for my trip to AZ, I decided to check my Hitachi SimpleTough 500 Gb drive that I bought back in August. And here, as they say, things got interesting. My laptop cowardly refuses to see the drive when i plug it in! LED is on, I can feel vibration, so the drive is getting power, but I cannot see it neither in USB "Safely Remove Hardware" window, nor in Disk Management utility. I also tried it on my Dell Precision workstation with exactly the same result.
SimpleTech's Support site is not particularly useful. The FAQ section lists this useful blob:

1) I have the drive plugged in but I cannot find the drive in "My Computer", why? The most likely cause would be not enough power provided by a single USB port on your computer. Unplug the portable drive from the cable and unplug the cable from the computer. Now, plug the cable into 2 USB ports directly on your computer. (If you have a desktop, you should plug the USB cable directly into the USB ports on the back of the computer. If this is a laptop, you should plug directly into a USB ports on the computer. Do not plug into a USB hub or docking station). Then plug the drive into the cable. In a few seconds you should see the drive listed in the "My Computer" window as a SimpleDrivePS.

Granted that there is no FAQ for SimpleTough drives (these come with USB cable permanently attached to the drive (photos later tonight), and adjusting for the difference in cables, we are still stuck with a recommendation to plug drive into 2(!) USB ports. One of my first portable USB drives (it was some generic brand) came with an adapter like that - there were two male USB connectors and one USB female. One of the male connectors was the main and second one was only pulling power. I bought that drive some time in 2006, and it died on me in a matter of year or so. I expected a little better from SimpleTech/Hitachi.

I've placed a support inquiry, so we'll see what comes out of it.

The interesting thing about this particular drive is that there is a DC connector that is visible right underneath the rugged cable, though the drive itself does not come with a DC adapter (well it is a PORTABLE drive, right?). I can see support response being something along the lines of "you need to buy a DC adapter in RadioShack (support site even lists a particular model) and then it will work". I don't know about you or folks at SimpleTech, but to me, having an additional cable and/or dual USB cord with a portable drive really outweigh thebenefits of portability. I've bought this drive because i needed a portable drive that i would not be afraid of tossing around a little, when I'm on a run.



Photos and updates to follow.

Review of Manfrotto 496 RC2 photographic ball head

Bogen Imaging introduced a new line of ball heads in November. They are to replace the old models as follows:

Model 492 replaces the 482
Model 494 replaces the 484
Model 496 replaces the 486
Model 498 replaces ... you guessed it... 488

Today I received my 496RC2 (the 494, 496, and 498 come with RC2 quick-release plates, and 498 also comes with RC4 quick-release plate) in the mail from Adorama and got a chance to play with it. I once bought a 484 ball head when i needed something small to put on my tripod, but I returned it soon thereafter, as I found it too small and got myslef an 804RC2 3-way head.

There are few features that improve on what already is a great device. In particular, all of the heads, except for the smallest have friction adjustment, which is great - really puts this head on par with the 222 Joystick (Grip) Head.

Lock knob (as well as the friction knob) is now a little more ergonomic - fingers are less likely to slip off the surface (486 had flat edges).

All models have 360 degree panoramic rotation. The 498 model has a separate pan lock.

It seems engineers at Manfrotto put additional thought into making the head lighter without sacrificing the strength - the 496RC2 weighs in at 0.93 lbs. - lighter than 1.01 lbs of its predecessor - may not seem like much, but I am sure it will make a difference on a hike or in carry-on. The way it was achieved is cutouts on the sides

... as well as on the release plate assembly

I know I'll be taking this head on the trips, rather than the 1.72 lbs 222 joystick.

The only one problem i may have with this head is the quick release safety - it does not stay in unlocked position (as it does on 222, for example). I would really prefer it to stay unlocked so it's easier to operate the release with one finger.

Overall, this is a great head, and I am thinking of selling my 222 in the near future. The construction is solid (as is always the case with Manfrotto), supports decent amount of weight (496 RC2 supports 13.23 lbs). I probably would not ditch a 486RC2 head if I had one to buy 496RC2, but as a new purchase of this type of head - this is definitely a "go".

Here are few shots of the head on its own and mounted on my 190 CXPRO4.

 

 

 

 

 

 

 

 

 

I buy my gear from Adorama and B&H Photo Video.